Tools

Park's Hex Wrench Set offers all the popular Allen wrenches (1.5, 2, 2.5, 3, 4, 5 and 6mm) in a convenient fold-up unit. The tool tips are chamfered for a positive grip and the one-piece fiber-reinforced-resin handle is light, comfortable, slip resistant and 40% stronger than steel.

Removes Presta and Schrader valve cores. CNC machined, anodized finish with laser-etched logo. Fits between spokes for quick and easy core removal. Features knurled end for a no-slip grip.

A dirty drivetrain causes poor shifting and unnecessary wear to expensive parts. The Chain Gang contains everything needed to quickly and easily clean the chain, freewheel cogs, and chainrings. The Chain Gang includes: - CM-5.3 Cyclone Chain Scrubber - GSC-1 GearClean Brush - 8 oz. bottle of Bio ChainBrite The CG-2.4 works on nearly any bike, including multi-speed, single-speed, and e-bikes.

Many chains use a master link that allows the chain to be installed and removed by hand. While master links don't require traditional chain tools, over time, dirt and corrosion can make it difficult to separate them by hand. Park's Master Link Pliers make removing and installing these master links quick and easy. Simply insert the specially sized jaws into the link and squeeze the vinyl-coated handles!

- Small and handy tool designed to remove and install Schrader valves, Presta valve cores, and Presta valve extenders

- 50 hour service kit for Deluxe and Super Deluxe rear shocks - Includes air can seals, piston seal, and glide rings

50 Hour Service Kit (Includes Air Can Seals, Piston Seal, Glide Rings) - Sidluxe A1 (2020)

• Service kits include air can seals and wiper • Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus

Periodic brake bleeds are necessary to maintain consistent stopping performance, and Avid's Disc Brake Bleed Kit has everything you need to keep your Avid Juicy, Code or Elixir hydraulic discs running strong.

Performing the right maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. Each service interval indicates the maximum number of riding hours designated for each type of recommended maintenance. Depending on the terrain and environmental conditions in your location, your riding style, and skill level, you may see more optimum performance if you service your SRAM and RockShox products at shorter intervals.

- Shimano style freewheel remover with guide - Comfortable handle with rubber grip - Compatible with all HG freewheels or cassette lockrings - Chromoly construction

The Trek Pro BITS Multi-Tool packs all of your essential riding tools into one compact kit, including a tubeless tire reamer. Plus it gives you the storage you need for tire plugs and a quick-link. Your go-to multi-tool for any ride, anywhere Don't get stranded without your tools! Trek Pro BITS Multi-Tool packs all the tools you need to fix a mechanical when you're on the road or trail. It also comes equipped with storage for key items like tubeless tire plugs (included) and a quick-link (sold separately). PRODUCT DETAILS - Includes 2, 2.5, 3, 4, 5, 6, and 8mm hex tools, T25, Phillips and flat screwdrivers, tubeless tire reamer, and a chain tool - The "ghost key" includes size 0, 1, and 2 spoke wrenches, valve core removal tool, and valve extender wrench - Storage for quick-links (sold separately) and tubeless tire plugs (included) - Precise, durable tools made from laser cut steel, a cast steel chain tool, and the tool body is anodized aluminum with a plastic storage compactment - Lightweight and compact design makes this tool kit easy to store nearly anywhere

• Updated to fit better in the hand with a more rounded, smoother shape • The precision sized SW-7.2 fits the three most popular spoke nipple sizes on the market • Nickel plated for years of service • Designed for the home mechanic. FIts the following size spoke nipples: • .127" (3.23mm) • .130" (3.30mm) • .136" (3.45mm)

Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools. • Made from hardened alloy tool steel • Uses 7mm or 9/32" 12 pt box end/socket • Sold singly or in pairs

- For use with majority of Hex bolts found on a bicycle - 4, 5, 6mm Hex

- For removal (and installation) of chain link pins - Compatible with 7, 8, 9, 10 and 11-speed chains - Comfortable rubber coated handle improves grip

- 2-in-1 trailside disc brake repair tool - Features disc brake truing slots as well as a piston press/spreader in one convenient tool - Sandblasted chrome finish resists corrosion

Updated to fit current 12-speed cassettes, this combination chain whip and freewheel / lockring remover wrench is heat treated to prevent bending, flexing and wear and features a long, molded handle in addition to a built in hex shaped driver. - Works on 5- to 12-speed road and mountain bike cassettes and freewheels - 1-inch (25.4mm) box-end wrench fits Park Tool Freewheel / Cassette Lockring Tools - Features hardened pins to keep the chain in place

- Three brush heads featuring tough nylon bristles and an integral scraper for mud de-clogging - Ideal for chain, cassette and sprockets - 10-speed compatible

You know that feeling when you're just rippin' along and you hear the dreaded psssssssssssss sound from your tire? Well have no fear the TCS Tire Plug kit is here. It's easy to use and will get you back on two wheels in no time. More time for miles of smiles, rather than expletives on the side of the road or trail. Yea, we have all been there. The TCS Tire Plug Kit uses durable "Rocket" anchors (because they look like tiny rockets) that stay in your tire and hold the plug in place. You will not lose a plug. The anchor will hold it in place like a ship at dock. But wait... there's more... You can reuse the anchors when you're all done. It's like a treasure chest when you need to swap-out your tires. The Rocket Plug Kit also features an 'Extra Hand' tool under the smaller cap. If you haven't pre-loaded the Rocket, the Extra Hand will temporarily plug the hole and take the pressure off while you prepare your Rockets and plugs. We went through a lot of arguments at WTB to get this thing dialed and man, we are so stoked on how it turned out. We hope you like it as much as we do. REUSABLE "ROCKET" ANCHORS Rocket anchors rotate once pushed into the tire and physically prevent the plug from pulling back through the tire when running higher pressure or through heavy cornering like traditional plugs can. Oh, we tried to pull it through, and we were holding up e-bikes from the plug. The anchor remains fixed in place until it’s removed from the inside of the tire and put back in the tool for future use. Reusable and Recyclable! Win, win! EXTRA HAND The Extra Hand (because who couldn't use an extra hand every once and a while) stopper can be pushed into the puncture to temporarily stop any loss of air while a rider determines how many tire plugs are needed and prepares to seal it. The Extra Hand can also be used as a reamer to create a more uniform hole for the tire plugs to seal. COMPACT AND LIGHT The TCS Rocket Tire Plug Kit is CNC’d from 6061 aluminum alloy with an integrated extra hand tool and plunger. It also has internal storage for four anchors (two large and two small included), and fifteen 1.5mm diameter tire plugs. Ready to Launch Rocket anchors can be preloaded with 1-4 tire plugs depending on the terrain and size of punctures riders typically encounter. Preloaded Rocket anchors are then placed on the plunger, ready to launch the moment a puncture occurs. The clock is ticking! TCS Tubeless TCS (Tubeless Compatible System) is WTB's standardized tubeless system. When you do get a puncture with a tubeless tire with sealant inside, this is a great way to fix it.

Everything you need Be prepared for roadside adjustments and minor repairs with the Trek Comp Multi-Tool. This simple tool features a compact design that easily packs away yet provides all of the essential tools to keep your bike tuned and running smooth. Product details - 2, 2.5, 3, 4, 5, 6, and 8 hex wrenches along with Phillips and flat-head screwdrivers, and T25 - Alloy sides for a sleek lightweight design

Secure engagement, easy to use, and fast! The CP-1.2 quickly grips cogs from 9 to 24 teeth with no manual adjustments. A great shop tool, the CP-1.2 is 13.7-inches (35cm) long and can be used with one hand to hold any 5-speed to 12-speed road or mountain cassette solidly during lock ring removal. Forged steel construction with a spring loaded return and comfortable dual density grips.

Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

Repair essentials for the home mechanic. Kit includes: - BBe-1 External Bottom Bracket - CCI-1 Crank Cap Bolt Install/Removal Tool - CW-1 Chain Whip - PDL-1 Pedal Wrench - TRL-3 Tire Levers (x3) - CAT-2 Crank Arm Remover Tool - CNT-3 Chain Tool - ST-1 Spoke Wrench - CLT-2 Cassette Lockring Tool - TA-1 8mm Hex / 1/2-inch Ratchet Adapter - HW-8 8mm Hex Wrench - TW-1 T25 Torx Wrench - HWS-2 Hex Wrench Set (2, 2.5, 3, 4, 5, 6mm) - PK-1 Inner Tube Patch Kit

A compact, efficient way to hold flat fixing essentials so you can get back on the bike quickly. The Pro Flat Pack has everything you need to fix a flat and get back on the bike quickly in an aero, easy to grab package. This all-in-one kit provides essential items needed to fix a flat tire with additional pockets for money and ID, plus extra soft, padded materials to ensure you won't be bothered by the poke of a tool while it's stashed in your back pocket. - Tight fitting, stretch neoprene material zips open for easy access - All the items you need to fix a flat tire - Includes Air Rush Elite, CO2‚ inflator, two 16g CO2‚ cartridges, and a padded bag - Reusable hand insulation sleeve, vulcanizing patch kit - Room in the bag for ID, money, keys, and more

RockShox 30mm Seal Kit

A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 12-notch tool fittings, including SRAM BSA DUB, Race Face Cinch, Rotor BSA30, and others. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive. The BBT-79.3 features integrated threads for full compatibility with the Park Tool BBT-RS Bottom Bracket Tool Retaining System (sold separately). The BBT-RS uses an adjustable spring-based tension system to apply consistent, adjustable pressure to the tool, ensuring full engagement with the tool fitting and preventing slippage. Fits 12-notch threaded bottom bracket tool fittings with a major diameter (outside of notches) of 45–47 mm and a minor diameter (inside of notches) of 44 mm, including: - SRAM BSA DUB - Race Face Cinch - Rotor BSA30 - Zipp Vuma - Hawk Racing BB3086 - and more - 3/8" drive fitting

- Slides into a hydraulic disc brake caliper to reset the piston when replacing pads, aligning pads, and performing other service procedures - Prevents scratching and damage to pistons

A worn chain shifts poorly and wears sprockets at an accelerated rate. Park Tool's Chain-Wear Indicator is a “go-no go” gauge designed to accurately indicate when a chain reaches .5% and .75%, the points at which most chain manufacturers suggest replacement. The updated CC-3.2 is longer, more accurate and features permanent measurement markings.

Everything you need Be prepared for roadside adjustments and minor repairs with the Bontrager Comp Multi-Tool. This simple tool features a compact design that easily packs away yet provides all of the essential tools to keep your bike tuned and running smoothly. Key features - 2,2.5,3,4,5,6,and 8 hex along with Phillips, flat and T25 - Alloy sides for a sleek lightweight design - Material: Steel