Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Shop Components

3T Arx II Pro
$79.99
3T's Arx II is a subtle refresh of the well-liked Arx alloy stem, which has found a place on every sort of bicycle since its launch in 2007. The faceplate is drawn in tighter at top and bottom for a more ovalized frontal appearance, while retaining the cutout 3T logo. The sides of the extension are slightly flattened for a more sculpted look by comparison with the tubular section of the first-generation Arx. A single M7 bolt clamps the stem to the fork steerer, instead of the twin M5 bolts previously used, and the Allen bolts used on the original Arx have been replaced by no-strip Torx bolts. - Stack height: 40mm - Weight: 135g (110mm)
Avid FR-5 Single Brake Lever
$11.00
The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone
Avid CPS Hardware Kit (Stainless Steel)
$14.00
Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.
Avid FR-5 Brake Levers
$19.99 - $21.00
The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes
Avid Road/Elixir/DB/Level B1 (2020+) Disc Brake Pads
$24.99 - $30.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
BOX Cusp Stem
$119.99
- 3-D forged from the finest 6061-T6 aluminum - Oversized clamp fits 35.0mm bars
Black Ops Knurled Pro
$9.99
- Threads onto 3/8" axles - Double-sided - Oversized - Alloy - Length: 3" / 74mm - Width: .94" / 24mm - Sold as a pair
Black Ops Chain Tensioner
$16.99
- Forged alloy construction - Double bolt centering design - Oversize 6mm hex bolts
Black Ops 980 Power Brake
$19.99
- Melt forged aluminum construction - Coiled spring tension adjust
Black Ops 981 Power Brake
$19.99
- Melt forged aluminum construction - Coiled spring tension adjust
Black Ops Nylo-Pro II
$44.99
These extremely durable pedals are constructed of a nylon composite thermoplastic body and feature eight removable steel M3 pins per side for superior grip. - One sealed bearing is paired with a long-lasting DU sleeve in each pedal for an impressively smooth interface - Chromoly steel spindle for strength - Spindle size: 9/16-inch
Blackspire Mono Veloce Chainring
$42.99
- CNC-machined 7075 T-6 Aluminum - For singlespeed & 1X drivetrains - Cut from .160" material for strength and long life - For use with 9 or 10-speed drivetrains - Anodized with laser-etched graphics
Blackspire Super Pro Chainring
$69.99 - $74.99
- CNC machined 7075-T6 aluminum with modified shift gates and special profiles to allow flawless shifting with 9sp and 10sp drivetrains - Middle and outer chainrings have strategically-placed stainless steel pins to further enhance shifting - 5mm thick middle ring, 4mm thick outer ring - Anodized black with laser-etched graphics
Bontrager Connection Trail Kids MTB Tire 20-inch
This mixed-use tire delivers off-road prowess with on-road manners for smaller-wheeled riders. Aggressive knobbies grip the loose stuff while a connected center ridge rolls smoothly. Product details - Easy-rolling path and pavement tire - Available in popular kids bike sizes - Great value
Bontrager Connection Trail Tire (700c)
With Bontrager's Connection Trail Tire, you get the best of both worlds. The shallow, closely spaced knobs roll fast and smooth on pavement, but provide sure-footed grip when you roll off the beaten path.
Bontrager Connection Trail Tire 26-inch
Discover a new way to get to your destination. The Connection Trail mountain bike tires deliver ride-refining confidence for journeys along a well-worn trail, and offer plenty of comfort when the path leads you to the road less traveled. Key features - Excels on pavement and the trail - Great value
Bontrager H5 Hard-Case Ultimate Hybrid Tire
Jump some curbs and find a new shortcut on the H5 hybrid tire. Sidewall knobs and water-shedding tread handle dirt and rain. Choose Hard-Case Lite or Ultimate protection. Key features - Excels on pavement and gravel paths - Lightweight, sub-tread material protects against punctures - Dual-layer, sub-tread material and sidewall reinforcement prevent punctures and cuts
Bontrager TLR Tire Sealant
$4.99 - $29.99
Bontrager's latest TLR sealant seals faster, lasts longer, and provides better air retention so you have a better tubeless experience with easier setup. The ammonia-free formula won't corrode rims or degrade tire rubber, and it provides permanent repair for punctures up to 6.5mm. Product details - Improved flat protection seals punctures faster - Increased air retention holds air longer with 3x less air loss than the original - Compatible with all TLR tires for use on road, gravel, and mountain bikes - Ammonia-free mixture won't corrode alloy rims or degrade tires - Effective in temperatures ranging from -5 to 120 degrees F (-21 to 49 degrees C) - Cool new blue color - Use with Bontrager TLR wheels, sealant, and rim strips for a complete tubeless system designed and tested to work together - Can be used in tubes to help seal punctures
Bontrager Wheel Magnets 
$4.99 - $5.99
Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride. Key features: - Universal wheel magnets work with any speed sensor - Thread-on speed magnet is positioned closer to the sensor for improved signal - Aero speed magnet provides a sleek, low-profile, aerodynamic solution
Bontrager Comp Shift Cable
$6.49
Rejuvenate the performance of your drivetrain with this convenient and valuable cable. - Rejuvenate the performance of your drivetrain with this convenient and valuable cable. - Extra-long 3100mm length ensures fitment for any application - Compatible with Shimano and SRAM drivetrains - Stainless steel cable is rust-proof, comes pre-stretched, and includes cable end cap - Diameter: 1.1mm
Bontrager Standard Presta Valve Bicycle Tube
$7.99 - $13.99
The industry standard comes in all sizes. Premium-quality Bontrager Standard butyl rubber tubes feature a 0.9mm wall thickness for the perfect balance of weight savings and durability. - 0.9mm wall thickness - Equipped with removable valve cores - 100% inspected for guaranteed quality - Best value 27-inch tire size equivalents - 700cx 23 – 25 also fits 27 x 7/8 – 1 - 700c x 28 – 32 also fits 27 x 1-1/8 – 1-1/4 - 700c x 35 – 44 also fits 27 x 1-3/8 – 1-3/4
Bontrager Standard Schrader Valve Bicycle Tube
$7.99 - $12.99
The industry standard comes in all sizes Premium-quality Bontrager Standard butyl rubber tubes feature a 0.9mm wall thickness for the perfect balance of weight savings and durability. - 0.9mm wall thickness - Equipped with removable valve cores - 100% inspected for guaranteed quality - Best value 27-inch tire size equivalents - 700c x 28 – 32 also fits 27 x 1-1/8 – 1-1/4 - 700c x 35 – 44 also fits 27 x 1-3/8 – 1-3/4
Bontrager Bontrager Rectangular Base TLR Valve Stem
$9.99 - $14.99
These rim valves are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance. Key features: - To be used exclusively with Bontrager Tubeless Ready (TLR) wheels - Required for Bontrager's Tubeless Ready (TLR) system setup - Removable valve core for easy sealant fill - Silver MTB valve is compatible with all Bontrager Mountain wheels except: Line XXX, Kovee XXX, and Line Pro 40 - Alloy Road Tubeless Rim Valve is compatible with all Bontrager alloy TLR road wheels
Bontrager SSR Grips
$9.99
Bontrager's SSR Grips are made from a dual compound: the hard inner core eliminates slippage on the bars, the soft outer layer provides great grip and all-day comfort in any condition.
Bontrager Universal Chainstay Protector
$9.99
- Quiets chain slap and protects chainstays from nicks and scratches - Standard protector fits most chainstays - Universal kits come with circle protectors to eliminate frame damage due to cable rub
Bontrager Adjustable Bracket-Mount Kickstand
$11.99
Keep your bike safely upright and at the ready with the Bontrager Adjustable Bracket-Mount Kickstand. The included hardware and mounting plate makes installation simple, and the center-mount design works with most bikes. Adjustable length adapts for bikes with 24" to 29" wheels and provides a stable upright position. - Center-mount design uses a top plate to clamp the kickstand to the frame near the bottom bracket - Adjustable height fits bikes with wheel sizes ranging from 24" to 29" - Sturdy alloy construction - Includes all required hardware and mounting plates
Bontrager Bontrager Rectangular Base TLR Valve Stem
$11.99 - $14.99
Tubeless setup made easy with valve stems designed to work as a system with Bontrager wheels, tires and rim strips The valves you need to upgrade to Tubeless These rim valves are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance. Product details - To be used exclusively with Bontrager Tubeless Ready (TLR) wheels - Use only with Bontrager TLR rim strip with rectangular base - Required for Bontrager's Tubeless Ready (TLR) system setup - Removable valve core for easy sealant fill - Sold as singles
Bontrager Universal Brake Cable & Housing Kit
$12.99
- All cables are pre-stretched - Low-friction, slick surface cables for smooth braking action - Can be used for road and mountain bikes - Stainless steel kit is rust-proof
Bontrager Bontrager Quick Release Seatpost Clamp
$13.99
Keep your seatpost right where you left it. Upgrade to a quick release seatpost clamp for easy seat height adjustments. - Follow laser-etched torque listing on collar
Bontrager Standard 90 Degree Valve Bicycle Tube
$13.99
The industry standard comes in all sizes Premium-quality Bontrager Standard butyl rubber tubes feature a 0.9mm wall thickness for the perfect balance of weight savings and durability. - 0.9mm wall thickness - Equipped with removable valve cores - 100% inspected for guaranteed quality - Best value
Page 1 of 20 Next page