The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone
$20.99 - $22.00
The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes
Original equipment pads for no-compromise disc brake performance. - Steel backed organic pad is quiet - Each pad kit includes two pads, a pad spreader spring, guide pin and clip - For use with Level, Level TL, Level T, Level Ultimate, Level TLM (B1, 2020+), DB, Elixir, and 2-Piece Road
Maximum pad life. Minimum brake fade. EXOTherm2 combines an extremely durable, smooth modulating pad compound with a cooling fin equipped back plate which provides consistent, powerful braking in all conditions. - pad wear rate is much lower than competitors - smooth, consistent brake performance - lightweight at 22 grams per pair (Disc 28 EXOTherm2) Fits: Shimano: - Dura Ace BR-R9170 - Ultegra BR-R8070 - BR-RS805 - BR-RS505 - BR-RS405 - BR-RS305
Shimano Ultegra RT800 centerlock disc rotors. - Aluminum spider - Includes standard type rotor lockring - Freeza technology, 3-layer structure with aluminum core and stainless steel outer layers and additional aluminum cooling fins reduces rotor surface temperature approximately 150 degrees Celsius compared to all-steel rotors - Requires external-type rotor lockring when installing onto 15/20mm axle hub - Hub/Disc Compatibility: Center-Lock Disc - Pad Compatibility: All Pad Compounds - Rotor Type: Two Piece
With a focus on reduced weight and cross-country tuned stopping power, Shimano SLX M7100 brakes provide intuitive modulation so that you can explore your limits with confidence. The BL-M7100 levers feature an optimized lever axle position, an additional handlebar contact point for greater stiffness, and refined ergonomics for rider comfort. At the caliper end, the BR-M7100 2-piston caliper provides lightweight braking performance and is combined with quicker piston retraction. - 10% stiffer than previous generation M7000 even under high-temp conditions - Quicker brake engagement with shorter free stroke - Tool-free lever reach adjustment - I-SPEC EV Clamp Band enables optional integrated shifter setup
6-Bolt mounting pattern - Wide leg design improves rotor`s lateral stiffness for a consistent and firm braking surface - Stainless steel construction - Torx bolts included
The Deore XT M8100 hydraulic disc brake is designed to provide high performance braking for a variety of MTB riding styles. Includes the brake lever and disc brake caliper. - BL-M8100 features a stiffer brake lever design that provides added support for aggressive riding - Servo Wave Action technology means quicker brake engagement with shorter free stroke - The BR-M8100 2-piston brake caliper is optimized for cross country riding styles - Includes finned metal pads and hose - Brake Caliper Type: Post Mount - Hydraulic Hose Length: 1000mm (Front) / 1700mm (Rear) - Hydraulic Fluid Type: Mineral Oil - Rotor Included: No - Pad Compound: Metallic
$73.00 - $78.00
SRAM's CenterLine rotors are light-weight, quiet, smooth and robust, featuring a two-piece design with an aluminum center and steel brake track.
$55.99 - $67.99
Shimano Deore XT RT-MT800 Center Lock disc brake rotors feature an advanced heat-dissipating design. - Rotor construction uses Shimano Freeza technology to boost heat dissipation and reduce fade - Quick and easy installation with spline mount and lock ring (included) - Compatible with metal and resin pads
$45.00 - $56.00
Stainless steel rotor designed for smooth and quiet braking with any disc brake caliper.
$15.99 - $17.99
- Suitable for light use applications - Good performance at low temperatures - High-density ceramic organic compound for extended pad life - Low rotor wear - Extremely quiet
SRAM's CenterLine X rotors are light-weight, quiet, smooth and robust, featuring a two-piece design with an aluminum center and steel brake track. 6-bolt rotors include titanium rotor bolts.
• DIN standard design with anti-corrosion hardware • All weather compound • Offset post
Shimano Replacement pads for Road brake shoes - Color: Black - Intended Brake Type: Caliper - Pad Attachment Style: Bolt-In (Caliper) - Pad Type: Replacement Insert - Cartridge - Rim Compatibility: Standard - Shimano Cartridge-type road brake pads fit models: Dura-Ace BR-9000, BR-9010, BR-7900, BR-7800, BR7700 Ultegra BR-6800, BR-6700, BR-6600, BR-6500 105 BR-5800, BR-5700, BR-5500 Non-Series BR-R600, BR-R561, BR-R560, BR-CX70s
$25.00 - $30.00
SRAM's Disc Brake Pads are reliable and rugged. These pads are compatible with Avid Trail and SRAM Guide and G2 disc brakes.
- High performance compounds recommended for all-conditions - Steel backing
XTR RT-MT900 rotors offer stable and versatile braking performance in the most demanding MTB conditions. - Center Lock design (alloy lockring included) - Incorporates Ice Technologies Freeza construction for superior heat dissipation - Compatible with both metal and resin brake pads
Key features: - Designed for use on carbon rims - Confirm wheel compatibility before use - Use in mud and grit will accelerate rim wear - 520554 is the Shimano style Flash Evo and fits Shimano and SRAM - 520555 is the Campagnolo style Race Pro
Finally: a mechanical disc brake for mountain bikes and fat bikes that offers superior performance and is a snap to set up. The Spyke is a dual-sided mechanical caliper where both pads actuate to provide even and precise clamping force. This results in even pad wear and easy pad adjustment with the addition of a barrel adjuster. No longer is adjusting the whole caliper necessary as the pads wear. All of this in a 169g (per caliper) package that works with all linear-pull levers. Caliper and mounting bolts included. SPECIFICATIONS - Dual-piston actuation - Even pad wear - Easy adjustment and set up - Works with ALL long-pull levers - TRP's own, ultra-grippy, semi-metallic pad that is Shimano M525/M515 compatible, allowing for further customization - Compound works well in dry conditions but may wear quickly in wet/muddy conditions - Rotor and adapters sold separately - Weight: 170g/caliper per wheel
We know good value. It comes with practicality. Durability. Sensible design. The Level TLM is that sweet spot—alloy lever blades, DirectLink actuation, DOT 5.1 fluid, and our new two-piston, two-piece caliper—all in a compact, lightweight package. This is the tried-and-true machinery for all-day, never quit performance. - A modern XC brake for the most demanding rides and races - Approachable price for bikes and riders of all levels
The SRAM CenterLine XR (CLX-R) rotor works in tandem with the SRAM eTap AXS drivetrain. It's designed specifically for road riding — and to keep braking quiet at every stop. - Streamlined form optimized for road use - CenterLine track offers quiet brake operation - Two-piece design reduces weight
$81.99 - $87.99
The pinnacle in mountain bike braking, SHIMANO XTR RT-MT900 disc brake rotors deliver superb stopping power for the most aggressive riding. The ICE TECHNOLOGIES FREEZA rotors dissipate heat to maintain braking performance on long downhill stretches. SHIMANO's CENTER LOCK mounting system makes installing and removing rotors quick and easy thanks to the spine mount and lock ring design. High-performance and consistent brake performance - Stable and versatile brake performance in the most demanding conditions New ICE TECHNOLOGIES FREEZA construction for boosting heat dissipation - Surface temperature cooled by -20°C (vs RT99, 203 mm) Rotor size - 160 mm, 180 mm, 203 mm
SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD). - For use with Level Ultimate & Level TLM Brakes - Pad Material: Organic - Type: Road/CX - Includes guide pin, clip, & pad spreader
- High performance compound recommended for all-conditions - Alloy backing plate: 50% lighter than steel backing plate
Ideal pad for everyday use. Compound works well on all aluminum rims and well suited for softer alloys, including magnesium. Fits: - SRAM | Shimano road
- Side-pull design - Includes lever, caliper, cable, and housing - 53-71mm reach - 330g per set
Shimano Deore hydraulic disc brakes offer reliable power and a rigid brake design for a multitude of riding styles, from XC to trail. The BL-MT501 levers feature a smooth and durable master cylinder design for sleek and stable braking, while the BR-MT520 4-piston calipers offer rapid initial pad contact and controllable brake power modulation. - 2-finger lever with tooled reach adjustment - The I-SPEC II clamp band offers optional integrated shifter setups - Brakes are pre-bled for convenient installation
SRAM's Centerline Rotor delivers consistent, quiet and powerful braking. The rotor has a consistent center of friction throughout rotation to minimize vibration, so the only thing you'll notice about your brakes is how well they perform.
Shimano Alivio hydraulic disc brake sets offer reliable and powerful braking, along with pre-bled hoses for convenient installation. - BL-MT200 hydraulic disc brake lever - BR-MT200 hydraulic disc brake caliper - Rotor sold separately
Page 1 of 2 Next page