Parts & Accessories
$9.99 - $15.99
These rim valves are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance.
Key features:
- To be used exclusively with Bontrager Tubeless Ready (TLR) wheels
- Required for Bontrager's Tubeless Ready (TLR) system setup
- Removable valve core for easy sealant fill
- Silver MTB valve is compatible with all Bontrager Mountain wheels except: Line XXX, Kovee XXX, and Line Pro 40
- Alloy Road Tubeless Rim Valve is compatible with all Bontrager alloy TLR road wheels
$13.99 - $19.99
The Muc-Off Tubeless Rim tape is made from their proprietary performance material with a pressure-sensitive adhesive to provide just the right amount stretch whilst maintaining durability and strength needed to create a lasting airtight seal. Semi-transparent material makes locating the valve hole easy.
$105.00
Upgrade or refresh your Bontrager wheels.
Genuine replacement parts
Whether you're looking to upgrade to the newest and freshest drivetrain or simply hoping to refresh your trusty wheelset, Trek Genuine Replacement Parts have you covered.
- Replacement freehub body
- Compatible with Bontrager Rapid Drive 108 hubs
- Pawls and springs sold separately
- Requires Micro Spline specific end cap
$14.99 - $15.99
This rim tape is crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance.
- TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion
- Tape is designed for wider Plus and Fat wheels
- Can also be used as a universal tubeless solution for non-Bontrager rims
- Use only with Bontrager TLR rim valve with round base
- Rim tape replacement is recommended if removed from the wheel
- One roll is 5m (197") in length
$20.99
These rim strips are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance.
Key features:
- To be used exclusively with Bontrager 29"/700c Tubeless Ready (TLR) wheels
- TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion
- Rim Strip replacement is recommended if removed from the wheel
- For specific compatibility, access 'WHEELS' tab on the Tech Site or contact Customer Service
$9.99 - $153.99
Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride.
Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go!
- For Downhill, Enduro and Road tires
- Seals tears and holes up to 6mm
- Contains UV puncture detection
- Won't dry out or ball
- Works from 15psi-120psi and temperatures from -20°C to +50°C
- Biodegradable
$11.99 - $15.99
Tubeless setup made easy with valve stems designed to work as a system with Bontrager wheels, tires and rim strips
The valves you need to upgrade to Tubeless
These rim valves are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance.
Product details
- To be used exclusively with Bontrager Tubeless Ready (TLR) wheels
- Use only with Bontrager TLR rim strip with rectangular base
- Required for Bontrager's Tubeless Ready (TLR) system setup
- Removable valve core for easy sealant fill
- Sold as singles
$41.00
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.
- DT Swiss Rear End Caps - QR x 135/142mm
$119.99
Upgrade or refresh your Bontrager wheels.
Genuine replacement parts
When it's time to refresh your trusty wheelset, Trek Genuine Replacement Parts have you covered.
- Replacement freehub body
- Compatible with Bontrager hubs using the DT Ratchet EXP platform
- For use with SRAM XDR cassettes
- Includes 12mm thru-axle end cap
$44.95
You know that feeling when you're just rippin' along and you hear the dreaded psssssssssssss sound from your tire? Well have no fear the TCS Tire Plug kit is here. It's easy to use and will get you back on two wheels in no time. More time for miles of smiles, rather than expletives on the side of the road or trail. Yea, we have all been there. The TCS Tire Plug Kit uses durable "Rocket" anchors (because they look like tiny rockets) that stay in your tire and hold the plug in place. You will not lose a plug. The anchor will hold it in place like a ship at dock. But wait... there's more... You can reuse the anchors when you're all done. It's like a treasure chest when you need to swap-out your tires. The Rocket Plug Kit also features an 'Extra Hand' tool under the smaller cap. If you haven't pre-loaded the Rocket, the Extra Hand will temporarily plug the hole and take the pressure off while you prepare your Rockets and plugs. We went through a lot of arguments at WTB to get this thing dialed and man, we are so stoked on how it turned out. We hope you like it as much as we do.
REUSABLE "ROCKET" ANCHORS
Rocket anchors rotate once pushed into the tire and physically prevent the plug from pulling back through the tire when running higher pressure or through heavy cornering like traditional plugs can. Oh, we tried to pull it through, and we were holding up e-bikes from the plug. The anchor remains fixed in place until it’s removed from the inside of the tire and put back in the tool for future use. Reusable and Recyclable! Win, win!
EXTRA HAND
The Extra Hand (because who couldn't use an extra hand every once and a while) stopper can be pushed into the puncture to temporarily stop any loss of air while a rider determines how many tire plugs are needed and prepares to seal it. The Extra Hand can also be used as a reamer to create a more uniform hole for the tire plugs to seal.
COMPACT AND LIGHT
The TCS Rocket Tire Plug Kit is CNC’d from 6061 aluminum alloy with an integrated extra hand tool and plunger. It also has internal storage for four anchors (two large and two small included), and fifteen 1.5mm diameter tire plugs.
Ready to Launch
Rocket anchors can be preloaded with 1-4 tire plugs depending on the terrain and size of punctures riders typically encounter. Preloaded Rocket anchors are then placed on the plunger, ready to launch the moment a puncture occurs. The clock is ticking!
TCS Tubeless
TCS (Tubeless Compatible System) is WTB's standardized tubeless system. When you do get a puncture with a tubeless tire with sealant inside, this is a great way to fix it.
$34.48
$68.95
50% Off
Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Cross Country 29er Tubeless Kit converts standard tubed wheels to tubeless so you can reap the benefits. Everything you need to go tubeless is included. Plus, you won't miss dealing with flat tires and you'll save money on tubes!
$15.99
- To be used exclusively with Bontrager 29""/700c Tubeless Ready (TLR) wheels
- TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion
- Rim Strip replacement is recommended if removed from the wheel
$105.99
Upgrade or refresh your Bontrager wheels.
Genuine replacement parts
Whether you're looking to upgrade to the newest and freshest drivetrain or simply hoping to refresh your trusty wheelset, Trek Genuine Replacement Parts have you covered.
- Replacement freehub body
- Compatible with Bontrager Pro-level hubs
$80.00
Durasync freehub bodies feature triple freehub bearings for increased axle stability to handle even greater vertical and torsional loads. This CNC machined durasync freehub is a direct replacement for your Neo hub, and includes pawls, springs, pawl retaining ring, and red freehub spacer. Bearings are pre-installed.
- 6-pawl system provides 36 points of contact and 10-degree engagement for quick acceleration
- Chromed steel bearings
- Wide bearing stance and axle design reduces flex and adds durability
- Low drag main seal prevents contamination and reduces resistance
- Mini Driver has a Shimano HG spline, but is 10mm shorter to accept 11-speed cassettes with 10t cogs from Hope and OneUp Components
$13.50 - $17.99
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims.
21mm width fits:
- ZTR Olympic
- ZTR Iron Cross
- ZTR 355
- ZTR Alpine
- ZTR Crest
- ZTR Alpha 340 (2 layers)
- ZTR Alpha 400 (2 layers)
- Most road clincher rims
25mm width fits:
- ZTR 355 (26", 650b, 29")
- ZTR Crest
- Crest MK3
- ZTR Arch EX
- ZTR Flow EX
- Crest S1
27mm width fits:
- ZTR Flow EX
- ZTR Bravo
- ZTR Hugo 52mm
- Arch S1
- ZTR Rapid 28
- ZTR Rapid 30
- Arch MK3
30mm width fits:
- ZTR Flow MK3
$19.99
- Axle adapters for CX/GX/MT/FB-1110 Elite Series front hubs
- Available in standard QR, 12mm, 15mm, and 20mm thru-axle options
- Material: Aly
- Color: Blk
$31.99
V2 Tubeless valves are stronger, lighter, and even easier to use thanks to the machined aircraft grade 7075 aluminum and Muc-Off's new Tire Insert air ?ow system. The new design features six slots that are machined into the base of the valve stem, allows tubeless sealant ?uid and air to ?ow freely, even when running tubeless tire inserts.
- 7075 Machined Aluminum valve stem and cap
- Tire Insert air flow system keep air moving freely and compatible with most tire foam inserts
- 4mm machined Allen Key slot for easy installation and removal
- Includes Valve Core Removal Tool (integrated into spare alloy cap)
- Supplied with various rubber bases to optimize fit with multiple rim types
$17.99
The Tubeless Tire Plug Pack kit contains fifteen 1.5mm tire plugs and four anchors (two small and two large) that are optimized for use with the TCS Rocket Tire Plug Kit, but will also work with most multi-tools in a pinch. The small anchor holds up to two plugs and can be pushed into the tire using a 2mm hex. The large anchor holds up to four plugs and is compatible with either a 2mm or 3mm hex.
Reusable "Rocket" Anchors
Rocket anchors rotate once pushed into the tire and physically prevent the plug from pulling back through the tire as a traditional plug would be due to high pressures or heavy cornering. Oh, we tried to pull it through, and we were holding up e-bikes from the plug. The anchor remains fixed in place until it’s removed from the inside of the tire and put back in the tool for future use. Reusable and Recyclable! Win, win!
15 Plugs
Each kit contains 15 plugs to keep you rolling. Ran out of plugs? No problem, grab this nifty refill kit and restock your Rocket tool.
TCS Tubeless-Ready
TCS (Tubeless Compatible System) is WTB's standardized tubeless system. When you do get a puncture with a tubeless tire with sealant inside, this is a great way to fix it.
Compact Kit
This was designed to be a refill kit when your TCS Rocket tool runs out of plugs or plugs. But while we were testing it, some folks preferred to just run it without the tool and just their 2mm or 3mm hex on their multi-tool.
Recyclable Packaging
Our product and marketing team are constantly working towards reducing the amount of packaging our products requiring, while still providing you with the necessary information to make an informed purchasing decision. It's no small task, but minimizing the total amount of packaging has become an integral part of product development.
$24.99
A universal valve adapter that provides a 300% increase in air flow for easier tubeless setup, less effort pumping, and is virtually clog-free.
300% MORE FLOW
Bontrager High Flow Valve Adapter is a quick and easy upgrade that is instantly noticeable. It provides easier tubeless setup with a 300% increased air flow rate, is virtually clog-free, and the best part is it's compatible with any valves that have a removeable core.
PRODUCT DETAILS
- 300% increased air flow for effortless inflation and tubeless setup
- Easily installs to any valve equipped with a removable core
- Virtually clog-free
- Built-in core removal tool in cap
- Compatible with any existing valves equipped with removable cores
- Sold as a pair
$99.99
Upgrade or refresh your Bontrager wheels.
Genuine replacement parts
Whether you're looking to upgrade to the newest and freshest drivetrain or simply hoping to refresh your trusty wheelset, Trek Genuine Replacement Parts have you covered.
- Replacement freehub body
- Compatible with Bontrager Rapid Drive 108 hubs
- Pawls and springs sold separately
- Install 3 pawls/springs for 54 tooth engagement or 6 pawls springs for 108 tooth
$15.99
- To be used exclusively with Bontrager 29""/700c Tubeless Ready (TLR) wheels
- TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion
- Rim Strip replacement is recommended if removed from the wheel
$17.99
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant.
Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads:
- MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi
- ERD 615, 622x49.9, 29 in x 52.3mm
Your rim has a stepped valve and is not compatible with this Schrader valve.
$5.50
Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride.
Key features:
- Universal wheel magnets work with any speed sensor
- Thread-on speed magnet is positioned closer to the sensor for improved signal
- Aero speed magnet provides a sleek, low-profile, aerodynamic solution
$26.99
Upgrade or refresh your Bontrager wheels.
Genuine replacement parts
Whether you're looking to upgrade to the newest and freshest drivetrain or simply hoping to refresh your trusty wheelset, Trek Genuine Replacement Parts have you covered.
- Replacement freehub body
- Compatible with SSR and Select wheels
- Includes 11mm Allen key adapter for installation
$119.99
Upgrade or refresh your Bontrager wheels.
Genuine replacement parts
Whether you're looking to upgrade to the newest and freshest drivetrain or simply hoping to refresh your trusty wheelset, Trek Genuine Replacement Parts have you covered.
- Replacement parts for Bontrager hubs using the DT 240 platform
- Compatible with all Bontrager wheels with DT 240 hub internals
- Versions available to fit QR or 12mm Thru Axle wheels
Page 1 of 1